The Petzl Dual Connect Adjust Lanyard is an adjustable double lanyard designed for multi-pitch climbing. It allows climbers to securely tether themselves to an anchor and install a rappel system, while the adjustable arm provides flexibility for managing rope and climbing equipment.

Featuring a 45 cm fixed arm and an adjustable arm that can be set from 15 to 95 cm, the DUAL CONNECT ADJUST allows users to choose a suitable length for different climbing situations. Its ergonomic ADJUST rope adjuster enables quick and precise one-handed length adjustment.

The lanyard uses dynamic 9.0 mm rope to help reduce the force transmitted to the user in the event of a short fall when used as specified. Compact and practical, it attaches to the harness belay loop using a simple girth hitch.

Key Features

• Adjustable double lanyard designed for multi-pitch climbing
• 45 cm fixed arm
• 15–95 cm adjustable arm
• Dynamic 9.0 mm rope helps reduce force transmitted during a short fall
• Ergonomic ADJUST rope adjuster for quick, one-handed adjustment
• TANGA rubber ring helps keep the carabiner properly oriented
• Designed for use with two Sm’D TWIST-LOCK-type locking carabiners
• Hole in the ADJUST allows a cord to be attached for easier unblocking when the lanyard is weighted
• Installs on the harness belay loop with a simple girth hitch
• Lightweight 160 g construction
• CE EN 17520 and UKCA certified

Adjustable Double Lanyard for Multi-Pitch Climbing

The Petzl Dual Connect Adjust Lanyard is designed for situations where climbers need to tether themselves to an anchor while also setting up a rappel system. Its two-arm configuration provides both a fixed connection and an adjustable connection for greater flexibility during multi-pitch climbing.

45 cm Fixed Arm and 15–95 cm Adjustable Arm

The lanyard features a 45 cm fixed arm and a second arm that can be adjusted from 15 to 95 cm. This allows the climber to select a length suited to the specific situation, helping with rope and gear management around the anchor.

Ergonomic ADJUST Rope Adjuster

The ergonomic ADJUST rope adjuster allows the length of the adjustable arm to be selected smoothly and precisely. Its design enables quick, easy one-handed adjustment, making it practical when managing equipment at an anchor.

Dynamic Rope for Short-Fall Force Reduction

The DUAL CONNECT ADJUST uses a dynamic 9.0 mm rope lanyard designed to help reduce the force transmitted to the user in the event of a short fall when used in the appropriate configuration.

Positioning lanyards do not have an energy absorber and must only be used below the anchor point where the potential fall factor is less than 1.

TANGA Ring for Carabiner Orientation

A TANGA rubber ring helps keep the carabiner properly oriented within the ADJUST rope adjuster. This makes clipping and unclipping easier and helps maintain the intended positioning of the carabiner.

The lanyard is designed for use with two Sm’D TWIST-LOCK-type locking carabiners, which are not included.

Easy Unblocking When Weighted

A dedicated hole in the ADJUST rope adjuster allows a cord to be attached. This can make it easier to unblock the lanyard rope when the adjustable arm is weighted.

Simple Harness Installation

The DUAL CONNECT ADJUST attaches directly to the harness belay loop using a simple girth hitch. This provides a straightforward installation method without requiring additional attachment hardware.

Technical Specifications

Adjustable Lanyard for Multi-Pitch Climbing and Rappel Setup

The Petzl Dual Connect Adjust Lanyard combines a fixed arm, adjustable arm, dynamic rope construction, and ergonomic ADJUST rope adjuster to provide flexible positioning during multi-pitch climbing. Its practical design makes it suitable for tethering to an anchor and installing a rappel system while allowing precise adjustment for rope and gear management.

Shop the Petzl Dual Connect Adjust Lanyard at Backpackers Outdoor for dependable climbing equipment designed for multi-pitch adventures.