Features
Klettersteig for size Klettersteig connectors look and behave very similarly to Offset Ds, but are wider. This design helps maximise the gate opening and the internal working volume, whilst still allowing any loads to be located as close to the spine of the connector as possible. Klettersteig connectors must pass an additional test to any of the other connectors as they are often subjected to loads in sub-optimal orientations.

Keylock clean nose for snag free connection DMM’s patented Taperlock closing mechanism increases gate push-in and cross gate strength using a special flared profile on the nose of the carabiner, as well as allowing a snag free connection for your ropes, slings and devices.

Easy to use with gloved hands A big carabiner back and ANSI gate types are easier to handle with gloves.

More Information

Gate Type

Kwiklock : Auto-locking gate requiring two distinct actions to open.

Locksafe : Auto-locking gate requiring three distinct actions to open.

Kwiklock ANSI : Same gate action as Kwiklock but the connector is also required to exceed 16kN in minor axis, side load and gate face tests.

Locksafe ANSI : Same gate action as Locksafe but the connector is also required to exceed 16kN in minor axis, side load and gate face tests.

Tech specifications